Installation Guide

3.31.16 1.1

HOW TO MEASURE FOR YOUR FREEZEPRO

WRAP

Selecting the right size FreezePro

Wrap for your equipment is a lot easier than you might think. All

you need is a tape measure, and you are ready to go!

CliCk HERE foR vidEo tutoRial: How to mEasuRE fREEzEPRo

wRaP

1. MEASURE FOR EITHER THE (1) CIRCUMFERENCE OR (2) DIAMETER:

2. MEASURE FOR THE DESIRED WIDTH:

CIRCUMFERENCE

DIAMETER

NOTE: It does not matter which method of measurement you decide to use. Just remember that you only

need to nd your measurement using one of the two ways described above.

WIDTH

NOTE: After nding either the circumference or diameter, measure for the desired width to determine the

width measurement of the application you want to insulate.

WARNING: When installing or measuring for FreezePro

Wrap, please follow all safety precautions and use

proper and adequate protective safety aids such as: protective gloves and suitable protective clothing.

Never use a metal tape for measuring purposes. Failure to do so may result in injury.

PAGE 1
HOW TO MEASURE FOR YOUR FREEZEPRO® WRAP Selecting the right size FreezePro® Wrap for your equipment is a lot easier than you might think. All you need is a tape measure, and you are ready to go! Click HERE for video tutorial: How to measure FreezePro® Wrap WARNING: When installing or measuring for FreezePro® Wrap, please follow all safety precautions and use proper and adequate protective safety aids such as: protective gloves and suitable protective clothing. Never use a metal tape for measuring purposes.
PAGE 2
3. FIND THE RIGHT FREEZEPRO® WRAP: The CIRCUMFERENCE (length) is 20in and the desired width is 12in = FPW 3012. OR FOR EXAMPLE: The DIAMETER (length) is 6in and the desired width is 12in = FPW 3012.
PAGE 3
4. GO AND ORDER ONLINE: 1. Go to shop.unitherm.com 2. Enter your part number in to the Search bar in the upper left-hand corner of the page 3. Click “Search” to get your FreezePro® Wrap Insulation Jacket Click HERE for video tutorial: UniTherm Shop Walkthrough 3.31.16 1.