Manualshelf

Installation Guide

ManualsBrandsUniTherm ManualsDuct AccessoriesIsocovers Iso-Wrap 24 in. x 6 in. Insulation for Pipes and Flanges
123
ISOCOVERS
Insulation Systems
7.31.15 1.0
2. TIE THE DRAW CORDS TOGETHER TO GIVE IT A SECURE FIT: (DO NOT
OVER-TIGHTEN)
3. PULL OUT A SUFFICIENT AMOUNT OF SS WIRE AND TWIST THE END OF
IT INTO A LOOP. TRIM THE SS WIRE AT THE BASE OF THE CYLINDER
AND ATTACH IT TO AN SS LACING HOOK ON THE ISOCOVERS
INSULATION JACKET: