User Manual

16
to the CCD socket.
Reverse camera type does not
match
Replace the reverse camera.
Rear view appears during
reverse position even when
system is not booted. Power
button is null
This is part of the safety feature
where the rear view function is preset
for safety priority.
Power on to boot the system after
resuming from the reverse position
to normal.
No GPS signal
GPS antenna is not connected
Connect the GPS antenna correctly
The car may be at the GPS signal
blind spot.
Drive for a distance to check GPS
signal. If the problem persists, please
contact customer service for
assistance.
Positioning and navigation
failed upon power on
Blind spot of the navigation map.
Some remote areas or routes may
not be covered in the map.
Please contact the customer service
to update the map
Unable to locate the
destination routes
Firstly, please ensure correct spelling of the destination followed by trying
possible names of the destination. If still unable to seach, the destination may
not be updated in our database.
Navigation routes are far
The navigation system sets a route to your destination by applying certain
built-in rules to the map data. Besides, distance, the navigation system will
take into consideration of the road grade, traffic rules, flyover, highway, main
road and others to ensure the driver in reaching the destination soonest
possible.
Blank on the map
May be due to scale setting. Try to zoom in and out to adjust the map display.
If the problem persists, it may be due to loss of GPS signal. Please reset the
destination or select a new landmark.
v) Back-up camera connection