User's Instructions

9
may be presented with an installation wizard: "Found
New Hardware Wizard". If so, let your computer
automatically install the necessary driver software. The
driver software has already been installed during the
U:fit installation and should be identified by the
wizard. It is not necessary to insert the U:fit
installation CD.
After successful installation of the USB driver,
continue with the "Connection Wizard for iCube" and
follow the instructions. No pairing is required for the
USB cable connection. Upon successful completion of
the connecting process, the “CableFree Fitting Status”
will inform you about the status of iCube.
U:fit System Configuration options
The “Pairing Wizard for iCube” can also be accessed
by selecting “Options”, and then “iCube”, in the menu
bar of the fitting application. In the same menu you
can also select or deselect iCube. Additionally, you can
initiate the Bluetooth pairing process as described
earlier.
Before using iCube to fit a client with hearing
instruments, make sure the icube battery is
sufficiently charged. Remove iCube from the iCube
charger and turn it ON.
Wearing iCube
Open the neckloop by unplugging the ridged jack, and
place iCube around your client’s neck.