User's Instructions

Getting started
Installing and using the iCube charger
Install the iCube charger by plugging the power supply
into a power outlet and docking iCube into the iCube
charger as shown below. It is recommended that you
use the iCube charger to store and charge iCube
whenever it is not in use. This way it will be sufficiently
charged and ready for the next fitting session.
Charging the battery
Your iCube has an internal, rechargeable battery. As
soon as you place your iCube on the iCube charger,
the battery starts charging.
For safety reasons, recharge the battery only with
chargers supplied by Unitron.
During the charging process, the battery indicator is lit
solid. Once the battery is fully charged, the battery
indicator will start flashing slowly. Typically, charging
an empty battery takes about 90 minutes. It is safe to
leave the charger connected overnight — the battery
cannot be overcharged.
When charging your iCube for the first time, leave it to
charge for at least three hours (even if the battery
3