User's Manual

PROBLEM POSSIBLE SOLUTIONS

The LED light on doorbell detector lights up yellow when

the doorbell detector is activated

• Low battery • Replace battery. Only use 9V alkaline 6LR61 or a lithium 6F22 type battery

The LED light on doorbell detector lights up green when the

doorbell detector is activated, but remote is not signaling

• Low battery in remote • Check battery in remote and recharge

• Remote too far from detector • Move remote closer to detector

• Doorbell detector set to wrong radio key • Check that all detectors are set to same radio key. If required follow

pairing instructions on page 24

The doorbell rings but the detector is not activated

• Detector not positioned in optimal spot next to doorbell • Move detector around the doorbell both closer and further away.

sound source The maximum distance is 1.5 in/3 cm from the doorbell.

• Can’t detect doorbell sound • Try to train detector to doorbell signal. If required follow pairing instruction

on page 26

The LED blinks yellow

• Doorbell detector is exposed to electromagnetic field from • Turn off magnetic detection on doorbell detector. INSTRUCTIONS on

loop system, etc. page 27

Remote signals with no apparent reason

• There is probably another system nearby with same • Change radio key on all units to different setting. INSTRUCTIONS on page 26

radio key that is interfering with your system

Doorbell detector

TROUBLESHOOTING GUIDE