User's Manual

PROBLEM POSSIBLE SOLUTIONS

Nothing happens when the telephone detector is activated

with the test button

• Low battery • Replace battery. Only use 9V alkaline 6LR61 or lithium 6F22 type battery

• The remote is not paired with the detector. Follow the instructions to pair

The LED lights up yellow when the telephone detector is

activated

• Low battery • Replace battery. Only use 9V alkaline 6LR61 or lithium 6F22 type battery

The LED lights up green when the telephone detector is

activated, but the remote is not signaling

• Low battery in remote • Recharge

• Remote too far from detector • Move the remote closer to the detector

• Telephone detector set to wrong radio key • Change radio key on all units to different setting. INSTRUCTIONS on page 26

Remote signals with no apparent reason

• There is probably another system nearby with same • Change radio key on all units to different setting. INSTRUCTIONS on page 26

radio key that is interfering with your system

Nothing happens when the house phone rings

• Nothing happens when the house phone rings • Make sure that the detector is properly plugged into the phone line

using the supplied phone cord

Telephone detector

TROUBLESHOOTING GUIDE