User Manual

76
(k)
(e)
You can also connect your uTV 2 to the headset socket
of your TV, using the audio cable:
Connect the stereo plug (e) to the audio input of the
uTV 2 (Audio IN).
Plug the other end into the headset output socket of
your TV.
When connecting the uTV 2 to the headset socket
of your TV, you are able to adjust the volume via your
TV remote control.
Some TVs will switch off their loudspeakers when
plugging the jack into the headset socket - the TV
will not be audible for other people. In this case use
the Cinch/RCA or SCART output socket as described
above. For further information on volume adjustment,
refer to step 5. The uTV 2 can also be connected to
any other audio source such as an MP3 player, PC or
home sound system using the stereo plug cable (k).