User Manual

98
fig. 2
(a)
(g)
Step 2: Switching on
1. Switch on the uTV 2 by a short press of the ON/
OFF button (a) as shown in fig. 2. The status light
(g) will illuminate green iniatially and may later switch
to blue.
Step 3: Pairing Headset and uTV 2
Before starting to use the uTV 2 and headset, they
need to be paired. The pairing procedure controls
which Bluetooth
®
devices are permitted to commu-
nicate with each other.
Pairing needs to be completed only once for
each device you wish to use with your headset.
● Initiate the pairing process on your headset as
stated in its manual.
● If the uTV 2 status light (g) is not rapidly blinking
blue already, press the ON/OFF button (a) for 5
seconds until the Bluetooth indicator (g) is rapidly
blinking blue as shown in fig 2.
● Wait until the Bluetooth indicator lightd (g) turns
solid blue. This can take up to 2 minutes but
typically is done within a few seconds.
Step 4: Listening to your TV
You will hear the sound of your TV directly in your
headset.
If you cannot hear the sound of your TV through
uTV 2, repeat steps 1 to 4.
The uTV 2 supports Bluetooth operation up to a
range of 30 m (100 ft). Line-of-sight between your
headset and the uTV 2 is not required. However,
interference in the environment by walls or furniture
may reduce the operating range.
uTV 2