User manual

28 Version 1.0 © UNIVERS

English

Menus and OSD

If you have chosen the Antenna Config menu item, the following menu appears:

Setup

In order to change a satellite’s LNB preferences, choose the satellite with the

CH press buttons and then, with the

VOL press buttons, select the Setup entry and

press OK.

Universal

In the case you use a universal LNB, please select <On> with the

VOL press buttons.

The values for the LNB oscillator will be automatically set (a 22 Khz signal will be

generated).

The values for an universal LNB are: LNB(Low) = 09750MHz

LNB(High) = 10600MHz

LNB

Here you can enter the oscillator frequency of your LNB.

With the

VOL press buttons you can select from a list of different parameters.

LNB Power

Here you can determine which voltages are valid for your LNB.

13V = vertical,18V = horizontal, 0V = no voltage.

The correct value for an universal LNB is 13/18V.

If you wish to switch from one tension to another, just do it by pressing

VOL.

Installation Menu > Antenna Config

Setup Search Select Easy Tuning Add Delete Rename

01 HotBird

02 Astra

03 Eutelsat W2

04 Eutelsat W1

05 Eutelsat W3

06 Sirius2

07 Intelsat707

Universal On

LNB(Low) 09750 MHz

LNB(High) 10600 MHz

LNB Power 13/18V

DiSEqC DiSEqC A

Positioner Disable

Setup the satellite parameters

Key: ▲ ▼ ◄ ► EXIT OK PGUP PGDN

Antenna Config