User manual

29 Version 1.0 © UNIVERS

English

Menus and OSD

DiSEqC

With the DiSEqC, the receiver has the possibility to use up to four universal LNB.

The following possibilities are available:

DiSEqC 1.0: A, B, C, D

Tone burst: Burst A , Burst B

What you need depends on your installation and your multi switches.

Example of usual installation: ASTRA = DiSEqC B and HOTBIRD = DiSEqC A

The

VOL press buttons will allow you to switch from one to another.

Positioner

With <Enable> selected (with the

VOL buttons), the DiSEqC 1.2 commands will

become active and start to control DiSEqC 1.2 engines.

If the function <Enable> is chosen, the DiSEqC menu item will fade out.

Once all preferences defined, press the OK press button in order to

load the new values. If you wish to leave the menu without

modifications, press the EXIT button.

In order to search all entries stored in the transponder list for programs from a given

satellite, choose the satellite with the

CH press buttons, select Search with the

VOL press buttons and press OK.

You should decide now whether the programs of the

chosen satellite are supposed to be eliminated or

whether you only wish to add the newly found

programs to the list.

Delete the existing programs

before searching?

Yes