Installation guide

English
PAG.
28
rev 1.1
4.6. SATELLITE GUIDE
When you enter “Satellite Guide” menu, you will see the screen
like beside (OSD 57).
Here you can enter your local longitude and latitude and the
satellite’s longitude. The receiver calculates the antenna’s
azimuth and elevation to point your antenna to the selected
satellite.
1. Use the [Number] buttons to input the values of “Local
Longitude”, “Local Latitude” and “Satellite Longitude”.
2. Press [
]buttons to select east or west in “Local
Longitude” and “Satellite Longitude” or to select north or south
in “Local Latitude”.
3. Highlight the “Start” item and press [OK]. In the lower part
of the window the corresponding values for the antenna setting
are displayed (OSD 58).
4. Orientation means the angle between south and satellite.
5. Press [Exit] to leave this feature
SYSTEM SETUP
OSD 55
OSD 56
OSD 57
OSD 58