Installation guide
English
13
OSD 34
OSD 33
3. Dolby Digital can select AC3 on or off.
4. Video Output is use for switching the video output mode. Now we provide below options: CVBS,
CVBS+RGB. You can press [Left/Right] key to select each mode circularly.
5. LCN Mode can control the channel whether sort by the information in the streams. The options is: On /
Off. You [Left/Right] key to select each mode circularly.
6.You can choose between VCR Master ( You see the VCR in the TV although the receiver is on ) or Receptor
master ( you can see the receiver in the TV although the VCR is on).
7. Press [Exit] key to draw back from TV System menu.
1. Startup Channel: Press [OK] key to enter Startup up
Service menu, and you will see the screen like below
(OSD33):
If the setting of Boot on Channel is On, it means the
following two items can be work. If the setting is Off, it
means the Boot on Channel function cant work.
In the Mode item, you can set the Startup Channel as
TV mode or Radio mode.
In Startup Channel menu, you can press [OK] key to
open the channel list, and select the channel that you want
it to startup, press [OK] key again to confirm.
2. Press [Exit] to draw back from Channel Setup menu
.
When you enter to Region & Time menu, you will see
window like below (OSD 34):
Region is used for selecting the country which you are
in. You can press [Left/Right] key to select each mode
circularly.
GMT Usage: This item is use for open the usage of GMT.
You can press [Left/Right] keys to switch Off / User Define
/ By Region.
The GMT Offset item is valid only when the setting of
GMT Usage is Uesr Define. You can press [Left/Right]
keys to switch GMT Offset value, and the range is -12:00
~ +12:00, increase each half hour progressively.
Date and Time items are valid only when the setting
of GMT Usage is Off. You can press [Left/Right] keys
to moving highlight and use number keys to input directly.
Summer Time items are valid only when the setting of GMT Usage is By Region. You can press
[Left/Right] keys to switch.
Time display function can control whether the time will be displayed on screen or not.
Press [Exit] key to draw back from Time menu.
MENU OPERATIONS
5.3 START UP SERVICE
5.4 REGION AND TIME