Installation guide

English
15
OSD 39
OSD 40
When you input to OSD Setting menu, you will see a
screen like below (OSD 39):
1. Subtitle Display: You can press [Left/Right] key to select
On or Off. If the current channel has subtitle information,
it will be showed up while this function is On. If this function
is Off, there wont show up subtitle information even if
the current channel has subtitle information.
2. OSD Timeout: When you switch channels in full screen,
there will show up some information about current channel
on the lower of the screen. And regarding to the duration
of these information show up on the screen, you can press
[Left/Right] key to set the time. The range of the duration
is 1 second ~ 10seconds.
3. OSD Transparency: Besides the setting of OSD Menu Style, you also can set the transparency of
OSD. You can press [Left/Right] key to select the values. There are 5 levels of transparency, 10%, 20%,
30%, and 40% and NO (means no transparency function).
4. Load OSD Setting Default: If you are not satisfy with your setting, you can move highlight to this item
and press [OK] key to reset parameters as default value.
5. Press [Exit] key to draw back from the OSD Setting menu.
You can set a password for anyone who wishes to operate
in the Installation menu. And you can also set the password
for the lock channels. (How to set the lock channel please
refer to LOCK) Here will show you how to setting and how
to revising the password.
1.In Parental Lock function, press [OK] key, there will
pop an dialogue for you to input the password. The default
password is 0000. When you input the correct password,
you will see a screen like below(OSD 40):
2.Menu Lock determining that when user wish to enter
Installation menu, whether have to input Password or not.
If the setting of Menu Lock is Yes which means user
have to key in password, set No means unlock.
3. Channel Lock determining that when user wish to play
the lock channels, whether have to input the password or not. If the setting is Yes, play the channels
with lock mark will show up a dialogue on the screen and ask for the password. If the setting of Channel
Lock is No, the Lock function will invalid.
MENU OPERATIONS
5.6 OSD SETTING
5.7 PARENTAL LOCK
2.Sleep Timer When you enter Sleep Timer, you will see the window like below (OSD 38):
*Press [Left/Right] key to switch the Sleep Time parameter. The option is like below: Off /10min /30min
/60min /90min /120min
*Sleep Timer can set the system enter standby mode automatically after the user setting time.
*Press [Exit] can exit the current menu.
3. Load Default Timer Setting When you enter Load Default Timer Setting, you will see the window like
below:
 Press [OK] key on Load Default Timer Setting, it will show Inpute Password dialogue.
 After you input the correct password, there will show a warning message to inquiry you All Timers will
be cleared, continue?
 If you select Yes, it will clear all the timer.
 You can press [Exit] key to exit.