Installation guide

English
5.8. RCU POSITION
16
OSD 42
OSD 43
IMG 4
4. New Password is used for revising password; you can input the new password in this item by using
number keys directly. After you filled in 4 digital numbers, the highlight will auto skip to Confirm Password
and ask you to input the new password again. If the password is correct, the screen will show up a message
of Change password successfully. After finish saving and draw back to System Setup menu, the revising
is complete.
5.Press [Exit] key to draw back from the Parental Lock menu.
OSD 41
When you switch to Tools menu, you will see a screen
like below(OSD 43): In Tools menu:
1. Press [Left/Right] key to select menu pages among
Channel, Installation, System and Tools.
2. Press [Up/Down] key to select menu items among each
items.
3. Press [OK] key to enter the selected item.
In order to avoid interferences between remote controls,
you have the possibility to change the code of it, to do that
you have to change the position of a switch in the remote
control.
But first of all you have to change this code in the receiver.
You can do this in the menu Position RCU. ( OSD41)
You have to select the same position in the receiver and
in the remote control.
MENU OPERATIONS
6. TOOLS