Installation guide
English
18
Video
Decoding MPEG-2 & MEPG-1
Bit rate Max 15Mbps
Output NTSC/PAL
Aspect ratio 4:3 / 16:9 / Auto
Active pixel "720 x 480 @ 30 fps; 720 x 576 @ 25 fps"
Output connector Euroconector, RCA
Audio
Decoding MPEG-2/MEPG -1 Layer I & II
Sampling rate 32 /44,1/ 48 Khz
Output connector Euroconector , RCA, SPDIF coaxial
Demodulator
Demodulation COFDM 2k, 8k
Guard 1/4, 1/8 , 1/16, 1/32
Imput Signal
Frequency VHF-UHF
Imput Level - 78 dBm - 20 dBm
Varios
Supply voltage 100 - 240 Vac 50-60hz
Power consumption Max. 30 W
Operation temperature +5º a +40º
Storage temperature -20º a +70º
Dimension (W x D x H) 280x 190 x 55 mm
Weight 1,3Kq
1. We offer the functions for user to connecting receiver (Master) to the other receiver (Slave) via serial
interface to upgrade software code and program list.
2. Connect master receiver to slave receiver via serial interface. Enter Software Upgrade menu in master
receiver and press [Left/Right] keys to switch upgrade mode. Upgrade modes include: allcode / maincode
/ videoback / radioback / defaultdb1 / userdb
3. Turn on slave receiver and it neednt operate any setting.
4. Moving highlight to Start on master reeciver and press [OK] key to start upgrade.
5. Press [Exit] key to save the parameters and draw back.
7.TECHNICAL SPECIFICATIONS
MENU OPERATIONS
6.4 SOFTWARE UPGRADE
We , FTE Maximal, declare that the products
U 4150
is in conformity with following Directives
LVD 73/23/EEC
EMC 89/336/EEC
as last amended by 93/68/EEC
If it wishes a copy of the declaration you can ask for it to the company.