Installation guide

English
Quick Installation Guide.
Step 2: Basic configuration of the receiver
The receiver includes an installation assistant that will help you to setup the different parameters.
When the receiver is turned on at first time (using the button at the rear panel of the receiver),
the next menu is shown on the TV:
In order to move through the different options of this menu, please use the keys of the remote
control. If an Overloading! Tuner Power is Off message is shown on the TV, please disconnect
the Antenna Input cable and change the Tuner Power option into Off
OSD Language: select the language of the menu and other information of the receiver. To
choose between the different languages, use keys of the remote control.
First Audio: press the keys of the remote control to choose the favourite audio language for
TV and Radio channels.
Second Audio: press the keys of the remote control to choose the second audio language.
In case of, when selecting a TV or Radio channel that has not the favourite language, the second
language selected will be automatically listened (if this action is allowed).
Country: select your country using keys.
Tuner Power: this receiver has the possibility of feeding a 5V indoor antenna directly through
the coaxial cable. If you have not an indoor antenna and the receiver is connected to a MATV
antenna, you should turn off this option using keys until [Off] option appears on the TV.
Auto Scan: before making an auto scan be sure that the data of the Country option (Image 1)
is correct, in other case the search of channels will be made wrongly. Once the Country option
is confirmed, please select the option Auto Scan and press [OK].
Image 1