Installation guide

PAG.

English

• Moving highlight to “Start” and press [OK] key to start the

game.

• Moving highlight to [Cancel] keys and press [OK] key to

draw back from the game.

• Start on the game:

• [ /------- use these arrow keys to guide chessman.

• [OK] — set chessman.

• [Exit] — Quit game and draw back to “Game” menu.

6.3 loAd fActorY defAult

When you press [OK] key In the “Load Factory Default” item:

1. There will pop a dialogue for you to enter the password, and

the default password is “0000”.

2. After you input the correct password, there will show a

warning message to inquiry you “The operation will load

default and erase all the channels that user added,

continue?”.

3. If you select “Yes” option, the all revised parameters of the

receiver will reset to default value. Please carefully to using

this function.

4. In step 1 and step 2, press [Exit] key can draw back from

this item and without saving.

6.4 softwAre uPGrAde

1. We offer the functions for user to connecting receiver

(Master) to the other receiver (Slave) via serial interface to

upgrade software code and program list.

2. Connect master receiver to slave receiver via serial interface.

Enter “Software Upgrade” menu in master receiver and

press [ ] keys to switch upgrade mode. Upgrade modes

include: allcode / maincode / videoback / radioback /

defaultdb1 / userdb

3. Turn on slave receiver and it needn’t operate any setting.

4. Moving highlight to “Start” on master reeciver and press

[OK] key to start upgrade.

5. Press [Exit] key to save the parameters and draw back.

For more info about software upgrade please visit :

http://www.universbykft.com

6.5 welcome PAGe

If this option is selected, the welcome page or quick installation

menu will be loaded.

menu oPerAtions