Operator Instructions Includes - Foreseen Use, Work Stations, Putting Into Service, Operating, Dismantling, Assembly and Safety Rules Manufacturer/Supplier Important Read these instructions carefully before installing, operating, servicing or repairing this tool. Keep these instructions in a safe accessible place.
pressing the trigger on the tool. Disconnect the air line and pour into the intake bushing a teaspoonful (5ml) of a suitable pneumatic motor lubricating oil preferably incorporating a rust inhibitor. Reconnect tool to air supply and run tool slowly for a few seconds to allow air to circulate the oil. If tool is used frequently lubricate on daily basis and if tool starts to slow or lose power. It is recommended that the air pressure at the tool whilst the tool is running is 90 p.s.i./6.3 bar.
UT5807 Ref No 1 3 4 6 7 8 9 10 11 12 13 14 15 16 18 20 21 23 24 25 27 28 29 30 31 32 Part No 126301 126303 126304-1AA0 126306-1JBO 126307 126308-IJBO 126309 P-0030-240 126311-1SPO 126312-1AAO O-0700-200 126314-1AAO 126315-1GRO O-0400-200 126318-1AAO 126320-1JBO 126321-1GRO 126323-1GRO 126324-1AAO 729705 126327-1SPO 126328-1GVO 126329 126330-1GVO 106316-1GRO 126332-1AA0 Nov 2004 Ver 1.
Declaration of Conformity Universal Air Tool Company Limited Unit 8, Lane End Industrial Park, High Wycombe, Bucks, HP14 3BY, England declare under our sole responsibility that the product Model UT5807 Right Angle Drill, Serial Number EN792 (Draft), EN292 Parts 1 & 2, ISO 8662 Part 1, Pneurop PN8NTC1 following the provisions of 89/392/EEC as amended by 91/368/EEC & 93/44/EEC Directives to which this declaration relates is in conformity with the following standard(s) or other normative document(s) Lane End
