User`s guide

6
procedure to calibrate the 1176 stereo adapter:
!
Remove the signals from both 1176 units
!
Disable the gain reduction on each limiter (rotate both ATTACK controls fully
CCW)
!
Connect the 1176-SA to both limiters (This requires two RCA style cables.)
!
Use the METER function pushbutton switches to set both units into GR mode
!
Adjust the potentiometer on the 1176-SA until both meters read 0dB
!
If it is not possible to zero both meters, reverse the stereo interconnect cables and
repeat the preceding step