User guide

The Technical Stuff
_______________________________________________________________________
- 24 -
NOTE: When changing operating voltage, the fuse value must be changed as well. Make sure the
2-LA-2 is properly set for the voltage in your area before applying AC power to the unit! Failure to
do so may damage the unit.
Changing Fuses
The AC power fuse is located in the AC power connector block. Remove the power cord before checking
or changing the fuse.
A 1.6 A time delay (slow blow) fuse is required for operation at 100 or 120 V.
A 800 mA time delay (slow blow) fuse is required for operation at 240 V.
 Never substitute different fuses other than those specified here!