User Manual

UAD Powered Plug-Ins - 235 - Neve 1073 Equalizer
Neve 1073SE
Controls
The Neve 1073SE controls are exactly the same as the Neve 1073. Please re-
fer to the Neve 1073 section for Neve 1073SE control descriptions (see
“Neve 1073 and 1073SE Controls” on page 232).
Neve 1073 Latency
The Neve 1073 (but not the 1073SE) uses an internal upsampling technique
to facilitate its amazing sonic quality. This upsampling results in a slightly
larger latency than other UAD plugins. You may enter a value in the “Sam-
ples” parameter in DelayComp or TrackAdv to compensate. The latency, and
its compensation, is identical to that of the UAD Precision Equalizer. See
“Compensating for Precision Equalizer” on page 53 for more information.
The Neve 1073SE does not require additional latency compensation because
it is not upsampled.
Note: Compensating for Neve 1073 is not required if the host application
supports full plugin delay compensation throughout the signal path, or when
it is used only on the outputs. See “Host PDC Implementation” on page 46.
Neve® and 1073® are registered trademarks of AMS-Neve, England and are used under license
with kind permission from Neve.