User Manual

UAD Powered Plug-Ins Manual - 98 - DreamVerb
Bypass The early reflections can be disabled with this switch. When the switch is off
(black instead of grey), the other Reflections controls have no effect. This
switch has no effect on the direct signal path.
Reflections Start This bat controls two early reflections start parameters. Dragging the bat hor-
izontally controls the ER predelay (the delay between the dry signal and the
onset of the ER). Dragging it vertically controls the amplitude of the reflections
energy at the ER start time.
Reflections End This bat controls two ER end point parameters. Dragging the bat horizontally
controls the ER end time (the time at which the ER is no longer heard). Drag-
ging it vertically controls the amplitude of the reflections energy at the end
point.
Filtering This parameter determines the amount of filtering from the Materials panel to
be applied to the early reflections. The Materials effect upon the ER is most
pronounced when Filtering is set 100%.
Note: The parameters in the Materials panel have no effect on the early re-
flections unless this parameter value is above 0%.
Figure 34. DreamVerb Reflections panel
ER Start control
bat (predelay &
amplitude)
Materials
Filtering
control bat
ER End control
bat (time &
amplitude)
Late-field
relative timing
display
Bypass
switch