User Manual

Apollo 8 Hardware Manual Specifications 35
ANALOG I/O
Frequency Response 20 Hz – 20 kHz, ±0.1 dB
Microphone Inputs 1 – 4
Connector Type XLR Female, pin 2 positive (Combo XLR/TRS)
Phantom Power +48V (switchable per mic input)
Dynamic Range 120 dB (A–weighting)
Signal-to-Noise Ratio 120 dB (A–weighting)
Total Harmonic Distortion + Noise –110 dBFS
Equivalent Input Noise –126 dBu
Common-Mode Rejection Ratio (CMRR) 73 dB (10’ cable)
Default Input Impedance 5.4K Ohms (variable via Unison plug-ins)
Gain Range +10 dB to +65 dB
Pad Attenuation (switchable per input) 20 dB (variable via Unison plug-ins)
Maximum Input Level +25 dBu (minimum gain, pad engaged)
Hi-Z Inputs 1 – 2
Connector Type ¼” Female TS Unbalanced
Dynamic Range 118 dB (A–weighting)
Signal-to-Noise Ratio 118 dB (A–weighting)
Total Harmonic Distortion + Noise –101.5 dBFS
Input Impedance 1M Ohms (variable via Unison plug-ins)
Gain Range +10 dB to +65 dB
Maximum Input Level +12 dBu
Line Inputs 1 – 4
Connector Type ¼” Female TRS Balanced (Combo XLR/TRS)
Dynamic Range 120 dB (A–weighting)
Signal-to-Noise Ratio 120 dB (A–weighting)
Total Harmonic Distortion + Noise –110 dBFS
Common-Mode Rejection Ratio (CMRR) 60 dB (10’ cable)
Input Impedance 10K Ohms
Gain Range +10 dB to +65 dB (Line Input Gain = ON)
Reference Level +4 dBu (Line Input Gain = BYPASS)
Maximum Input Level +20.2 dBu
(continued)