User's Manual
Table Of Contents
- A Letter from Bill Putnam Jr.
- Introducing Apollo Solo USB
- Getting Started
- Hardware Controls & Connectors
- Apollo Solo USB System Overview
- Working With Apollo Solo USB
- Essential Apollo Solo USB Concepts
- Setting the DAW to use Apollo Solo USB I/O
- Accessing Apollo Solo USB’s I/O in the DAW
- Input Monitoring with the DAW
- Using Console with the DAW
- UAD Plug-Ins: Console versus DAW
- Virtual I/O
- Using Apollo Solo USB for System Sound I/O
- Using Apollo Solo USB Without Audio Software
- Console Overview
- What is Console?
- Console Functions
- Global Functions
- When To Use Console
- Interactions Between Console and Apollo Solo USB
- Accessing Console
- Console Layout
- Global Window Elements
- Meter Bridge Overview
- Info Bar Overview
- Current Bank Overview
- View Column Overview
- Monitor Column Overview
- Channel Strips Overview
- Console Plug-In Inserts Overview
- Insert Effects Overview
- Popover Windows
- HP Cue Overview
- Sends Overview
- Console Sessions Overview
- Console Settings Overview
- Multiple Undo/Redo
- Keyboard Focus & Control
- Adjusting Console Controls
- Controls Shortcuts
- Keyboard Shortcuts
- Console Reference
- Console Plug-In Inserts
- Insert Types
- Inserts Signal Flow
- Inserting UAD Plug-Ins
- Removing UAD Plug-Ins
- Editing UAD Plug-Ins
- Insert Assign Popover
- Inserts Display
- Insert State Indicators
- Insert Hover Options
- Insert Options Menu
- Channel Insert Effects
- Plug-In Editor Window
- Channel Strips
- Presets Manager
- Presets Manager Popover
- Save Preset Popover
- Console Settings
- Unison
- Console Recall Plug-In
- UAD Meter & Control Panel
- Using UAD Plug-Ins
- Tempo Sync
- UA Account & Store
- Latency & Apollo Solo USB
- Device Drivers
- Troubleshooting
- Glossary
- Specifications
- Hardware Block Diagram
- Universal Audio History
- Notices
- Technical Support
![](/manual/universal-audio/aplsu-he/user-s-manual-english/images/img-80.png)
Apollo Solo USB Manual Console Overview 80
Sends Overview
Apollo Solo USB has four stereo mix buses that are configured and adjusted within
Console: Monitor, auxiliary 1, auxiliary 2, and HP cue. Each Apollo Solo USB input
has independent level, pan, and mute controls for each of the stereo mix buses. These
controls are used to “send” signals into the mix bus.
Stereo Mix Buses
In addition to the main monitor mix, the following stereo mix buses are available:
AUX 1 & AUX 2
The two stereo auxiliary buses are typically used for shared effect processing (to reduce
UAD resource usage) for realtime monitoring with time-based effects such as reverb and/
or delay. The aux mixes are adjusted via each input’s two aux send controls.
By default, the aux sends are post-fader and post-mute. The aux sends can be switched
to be pre-fader and pre-mute. The Aux Pre / Aux Post function switch for each aux is
located in its respective auxiliary bus return strip.
HP Cue
The HP cue bus is for creating a stereo mix that is different from the main monitor
mix. Cues are typically used for performers that want to hear a headphone mix that is
different from the main monitor mix, or for routing individual channels or mixes to other
equipment.
The HP cue mix is adjusted via the HP send on each input and aux strip. All HP sends
are pre-fader and pre-mute so they are not affected by adjustments to the main monitor
mix.
Mix Bus Returns
The stereo mix bus returns are used to route the mix to available outputs.
AUX
The auxiliary mixes are routed to the aux return strips. HP sends are available on the aux
returns for routing aux effects to the HP cue mix bus.
See Aux Returns for details.
HP Cue
The HP cue mix is heard via the selections in the monitor controls section. To hear the
HP cue mix in the headphones, HP must be manually routed to the HP output via the
Cue Outputs Popover.
The Monitor outputs can be switched to output the HP cue mix instead of the monitor
mix.