User Manual

10/8/2015 ApolloTwinSupportPage
http://www.uaudio.com/support/apollotwinsupport#quickstart 6/8
2. PresstheLevelknob(1)tomutethemonitoroutputs.TheVolumeLevelIndicatorLEDs(2)areredwhenthemonitorsare
mutedandMonitorisselected(6).
3. Totogglethemonitormutestate,presstheLevelknob(1)wheneverMonitor(6)isselected.
Notes:
*TheHiZinputisautomaticallyselected,overridingthechannel1MicandLineinputs,whena¼”monoTS(tipsleeve)plugis
connectedtotheHiZInstrumentjack(12)onthefrontpanel.
Tocontrolbothchannelssimultaneouslywhenastereosourceisconnected,presstheLINKbutton(11)whenaninputis
selected(9).
Lineoutputs3&4areaccessedandcontrolledviasoftwareonly(ConsoleorDAW).

WhatNext?
RefertotheApolloSoftwareManualtolearnhowtoconfiguretheaudiointerfacesettings,usetheConsoleapplicationand
RealtimeUADProcessingforliveinputmonitoring,usetheConsoleRecallplugininaDAW,andmuchmore.
ExploringConsole
OpeningConsole
Toopentheapplication,clickitsiconintheMacOSXDock.

Exploretheinterface
ForcompleteConsoledetails,seetheApolloSoftwareManual.


GeneralUsageNotes
ConsoleApplication
(ApolloTwinDUOonly)RealtimeUADProcessingwithUADpluginsinConsoleusesDSPdifferentlythanwhenUADplugins
areusedwithinaDAW.Tomaintainthelowestpossibleinputlatency,UADpluginsusedonasingleConsoleinputare
“chained”andmustbeprocessedwithinasingleDSPchip.Therefore,itispossibletogetaDSP/PGM/MEMlimitexceeded
messageeventhoughtheUADgaugesmayindicatethereisplentyofDSP/PGM/MEMavailable.
Session,plugin,andI/OpresetfilessavedwithinConsolewillnotbesavedifthe"/"(forwardslash),"\"(backslash),or"?"
(questionmark)charactersareinthefilename.AvoidtheseandotherspecialcharacterswhensavingConsolepresetsofany
type.
SampleRateChanges