User Manual

Apollo Twin MkII Hardware Manual Notices 34
Notices
Important Safety Information
Before using this unit, be sure to carefully read the applicable items of these operating
instructions and the safety suggestions. Afterwards, keep them handy for future
reference. Take special care to follow the warnings indicated on the unit, as well as in
the operating instructions.
Water and Moisture – Do not use the unit near any source of water or in excessively moist
environments.
Object and Liquid Entry – Care should be taken so that objects do not fall, and liquids
are not spilled, into the enclosure through openings.
Ventilation – When installing the unit in a rack or any other location, be sure there is
adequate ventilation. Improper ventilation will cause overheating, and can damage the
unit.
Heat – The unit should be situated away from heat sources, or other equipment that
produces excessive heat.
Power Sources – The unit should be connected to a power supply only of the type
described in the operating instructions, or as marked on the unit.
Power Cord Protection – AC power supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or against them. Pay particular
attention to cords at plugs, convenience receptacles, and the point where they exit from
the unit. Never take hold of the plug or cord if your hand is wet. Always grasp the plug
body when connecting or disconnecting it.
Cleaning – Follow these general rules when cleaning the outside of the unit:
a. Turn the power off and unplug the unit
b. Gently wipe with a clean lint-free cloth
c. Do not use aerosol sprays, solvents, or abrasives
Nonuse Periods – The AC power supply cord of the unit should be unplugged from the
AC outlet when left unused for a long period of time.
Damage Requiring Service – The unit should be serviced by a qualified service personnel
when:
a. The AC power supply unit has been damaged; or
b. Objects have fallen or liquid has been spilled into the unit; or
c. The unit has been exposed to rain; or
d. The unit does not operate normally or exhibits a marked change in performance; or
e. The unit has been dropped, or the enclosure damaged.
Servicing – The user should not attempt to service the unit beyond that described in
the operating instructions. All other servicing should be referred to qualified service
personnel.