User Manual

Specifications 24Apollo 16 mkII Hardware Manual
ANALOG I/O
Frequency Response 20 Hz – 20 kHz, ±0.1 dB
Line Inputs 1 – 16
Connector Type Two Female DB25, Tascam wiring
Dynamic Range 119 dB (A–weighting)
Signal-to-Noise Ratio 119 dB (A–weighting)
Total Harmonic Distortion + Noise –112.5 dB @ -1 dBFS
Common-Mode Rejection Ratio (CMRR) 75 dB (10’ cable)
Input Impedance 10K Ohms
Input Reference Level +4 dBu (fixed)
Maximum Input Level (+4 dBu setting) +20.2 dBu
Maximum Input Level (-10 dBV setting) +6.2 dBV (unbalanced)
Line Outputs 1 – 16
Connector Type Two Female DB25, Tascam wiring
Dynamic Range 126 dB (A–weighting)
Signal-to-Noise Ratio 126 dB (A–weighting)
Total Harmonic Distortion + Noise –118 dBFS @ -1 dBFS
Stereo Level Balance ±0.01 dB
Output Impedance 100 Ohms
Maximum Output Level +20.2 dBu
Monitor Outputs 1 – 2
Connector Type XLR Male
Dynamic Range 124 dB (A–weighting)
Signal-to-Noise Ratio 123 dB (A–weighting)
Total Harmonic Distortion + Noise –117 dBFS
Stereo Level Balance ±0.01 dB
Output Impedance 100 Ohms
Maximum Output Level +20.2 dBu
(continued)