Owner's manual

Apollo Twin Hardware Manual Chapter 2: Quick Start 17
Registration & Authorization
Before proceeding, confirm that the Apollo Twin software is already installed, the com-
puter was restarted after installation, and the Apollo Twin hardware is powered and
connected to the computer via Thunderbolt (the hardware and software systems must be
communicating properly).
Important: The following procedure requires the computer to be connected to the
Internet. To authorize a system that is not connected to the Internet, see "Offline
Authorization" in the UAD System Manual.
Registration & Authorization Procedure
To register and authorize Apollo Twin, follow the steps below.
Note: Registration is not a separate procedure; it's part of the initial authorization
process and only occurs once.
1. Launch the UAD Meter & Control Panel
To open the application, click its icon in the Mac OS X Dock.
Launching the UAD Meter & Control Panel
2. Open the UAD Meter's Plug-Ins Panel
To access the panel, first click the menu button in the UAD Meter window (1), then
select “Plug-Ins...” from the drop menu (2).
Accessing the Plug-Ins panel within the UAD Meter & Control Panel application
Click
1. Click
2. Select