Technical information

Apollo Software Manual Chapter 5: UAD Plug-In Inserts 103
Channel Insert Effects
Note: For an overview of Insert Effects, see page 33.
Channel Insert Effects Switch
This switch determines whether or not Realtime UAD Processing occurring within an in-
dividual Console input is routed to the associated DAW input. For additional details, see
Global Insert Effects.
Tip: Insert Effects can be switched for all channels simultaneously with the Global
Insert Effects switch.
The large channel insert effects switch (above left) is visible when the INPUTS display
is active. A smaller switch is available in both the INPUTS and OVERVIEW displays. In
either view, click the INS switch (or a colored indicator) to change the state.
REC (print wet) – The indicator is RED and UAD processing in all inserts in the channel
is routed to the associated DAW input for recording.
MON (print dry) – The indicator is BLUE and the unprocessed signal is routed to the
DAW input. UAD processing is heard in monitor outputs only.
Important: UAD plug-in processing in Console’s Unison and auxiliary inserts is
always routed to the DAW (when recording the AUX channels), regardless of the
current Insert Effects setting (Unison & aux insert processing is always recorded).
Channel Insert Effects Switch
(INPUTS display only)
Channel Insert Effects Switch
(OVERVIEW & INPUTS display)