Technical information

Apollo Software Manual Chapter 6: Console Settings 130
Cascade Switch
The Cascade switch is used to quickly assign continuous I/O channels if routings have
been changed from default values.
Note: Cascade doesn’t do anything when the Mode Menu displays “Default” be-
cause all channels are already continuous in default mode.
When Cascade is clicked, the Cascade switch and all channel numbers are illuminated.
Click+hold any channel number, then swipe down adjacent channel numbers to quickly
assign the channel(s) to the next available channel(s) in the device.
Tip: Increase the vertical size the Console Settings window to view more channels
simultaneously, so more channels can be swiped.
Using Cascade to quickly assign multiple channels. In this example, ADAT 1 was previously
assigned to LINE 1 (left screenshot). With Cascade engaged (right screenshot), swiping the
ADAT output across the LINE outputs quickly reassigns the LINE outputs to ADAT outputs.
1. Click+Hold
channel
number
2. Swipe Down
channel
numbers