Technical information

Apollo Software Manual Chapter 6: Console Settings 133
Window Title Bar
Navigation Switches
Input/Output Channel
Switches the window to display the input or output of the same Apollo channel.
Previous/Next Channel
Switches the window to display the previous or next Apollo channel.
Tip: The popover moves from channel to channel with these switches. To prevent
the popover from moving when these switches are used, drag the window to any
location other than its default position.
Apollo Hardware Channel
The name of the Apollo hardware channel that is being re-assigned is displayed at the
top of the window.
Route Assign Columns
The Device, Inputs, and Outputs columns are displayed in the Route Assign window.
Apollo Device
The DEVICE column on the left displays all detected Apollo devices and the NONE
switch. Click a device to select it for channel assignments in the other two columns.
Click NONE to remove all I/O assignments from the channel.
Channel Type
The TYPE column in the middle displays all available channel types for the selected
Apollo device. Click a channel type to select it and display all channels available for as-
signment in the INPUT/OUTPUT column.
Available Routes
The column on the right displays all available routes for the selected channel type. Click
an available route to assign the input or output. The assigned route is highlighted in
blue.
Note: If an output is gray in the output column and cannot be selected, the out-
put is already in use by an input channel (Flex Route), cue output, or ALT output.