Technical information

Apollo Software Manual Chapter 10: Multi-Unit Cascading 174
Monitor Outputs on Expander Units
When multi-unit cascading, the monitor outputs of all expander units are available as ad-
ditional line outputs via Flex Driver (in the Core Audio panel within the Console Settings
window). In this configuration, the monitor outputs of the expander units are not affected
by the Monitor Level knob.
Multi-Unit Headphone Outputs
All headphone outputs for all connected Apollo units (monitor and expander) are avail-
able to output the monitor or cue mix buses via the Cue Outputs Popover.
Multi-Unit Cue Outputs
Cue mix buses can be routed to physical outputs (line, ADAT, etc) on the monitor unit
only. However, cues mix buses can be sent to any available headphone output via the
Cue Outputs Popover.
Multi-Unit Monitor Control
Monitor Knobs
The monitor knob on the front panel of expander units (except Apollo Twin, as below),
and its surrounding green LED indicator ring, are disabled. To adjust the monitor output
level, the front panel monitor knob on the monitor unit (or the monitor level controls in
Console or the Console Recall plug-in) must be used.
Apollo Twin Remote
When Apollo Twin is connected in a multi-unit system, its monitor knob mirrors that of
the monitor unit for volume and mute control. This feature offers convenient desktop
control of the monitor and ALT speakers.