Technical information

Apollo Software Manual Chapter 3: Console Overview 36
Mix Bus Returns
The stereo mix bus returns are used to route the mix to available outputs.
Auxiliary
The aux mixes are routed to the aux return strips. Cue sends are available on the aux
returns for routing aux effects to the cue mix buses.
See “Aux Returns” beginning on page 75 for details.
Cues
The cue mixes are heard via the selections in the monitor controls section. Cues are
routed to available Apollo outputs via a matrix in the Cue Outputs window. The Monitor
outputs can be switched to output any cue mix instead of the monitor mix.
For cue return details, see “Cue Outputs Popover” beginning on page 82.
Sends Access
The Sends can be accessed and adjusted in the Overview and Sends views.
Note: Sends are not visible in the Inputs and Inserts views.
Overview View
An overview of an input’s sends state is shown in each input channel strip, as shown
below. Clicking this overview opens the Sends Popover, where the sends can be adjusted.
If the Console window is vertically re-sized tall enough, individual send knobs appear in
place of the sends overview.
The Sends Display within each input channel strip in Overview view
Channel Send Level Indicators
Channel Send Fader Indicators
Send Bus Name & Colors
Channel Send Mute Indicators
(square above bus name)
Click to open Sends popover