Technical information

Apollo Software Manual Chapter 3: Console Overview 41
Popover Windows
Some Console functions that are not visible in the
main window are accessed in popover windows.
Popovers are a special type of window that automati-
cally close when any area outside of the popover is
clicked.
Note: The size of popover windows cannot be
adjusted.
To close any popover, click anywhere outside of the popover, press the “X” switch at up-
per right of the window, or type the “esc” (escape) key on the computer’s keyboard.
The following functions are accessed via popover windows:
Cue output assign Channel presets
Rename/link channel inputs Console session presets
Sends (Aux & Cue) Flex Route assign
Insert assign Flex Driver assign
Plug-in presets Flex Driver I/O presets
Multiple Undo/Redo
Console supports multiple levels of Undo and Redo for all edit operations. Undo and
Redo operations can be performed repeatedly to step backwards and forwards through
edit operations as long as the current session is open.
• To step backwards and undo (revert) edit operations, choose Undo from the Edit
Menu or type command-z.
• To step forwards and re-execute the edit, choose Redo from the Edit Menu or type
command-shift-z.
Undo/Redo Cache
Edits are stored in the Undo/Redo cache. Edits within a particular session can be re-
verted with Undo/Redo until the cache is cleared. Both of these operations will clear the
Undo/Redo cache:
• Console is quit
• A different Console session is loaded
Important: Prior Undo/Redo operations cannot be performed after the Undo/Redo
cache is cleared.