Technical information

Apollo Software Manual Chapter 4: Console Reference 49

Global View Column Controls

Several controls appear in all View Columns. These controls (detailed below) have identi-

cal functionality in all Views.

Menu Switch

The MENU switch is located at the top of the View Column. Clicking the

switch reveals the Application Menus, where various Console functions

can be accessed.

Default Switch

When Option Latch is active with the parameters DEFAULT switch, click-

ing any control returns the parameter to its default value.

Note: The DEFAULT function is primarily for knob and fader values. It

does not apply to any preamp settings, plug-in inserts, SOLO/MUTE

switches, monitor levels, customized input names, and similar functions.

Clear Switches

The CLEAR switches are located near the bottom of all View columns.

Clear Clips

This switch clears all clip indicators and peak hold indicators on all me-

ters.

Tip: Clip and peak hold indicators can be individually cleared by clicking any indi-

vidual meter.

Clear Solo

Whenever Solo is engaged on any channel input, the Clear Solo switch ﬂashes yellow.

Clicking the Clear Solo switch deactivates the Solo function of any/all channel inputs.

Tip: Click Clear Solo again to return all channels to their previous Solo states.

Settings Switch

The SETTINGS switch is located at the bottom of all View columns. It

opens the Console Settings window, where many global functions are de-

ﬁned. For complete details, see “Chapter 6: Console Settings” beginning

on page 115.