Technical information

Apollo Software Manual Chapter 4: Console Reference 51
View Options
The individual View Column Options are detailed in this section. See the Modifiers Over-
view for details about how to operate the Modifier controls.
Overview, Inputs, & Inserts View Options
The View Options for the Overview, Inputs, and Inserts Views are
identical. Each option is described below.
Overview Note: In the Overview View Column, the Power,
Remove, and Copy modifiers may not be visible if the Console
window size is vertically condensed. To bring all Overview
modifiers into view, increase the vertical window size if pos-
sible, or select a different View.
Power Modifier
This option toggles an individual plug-in’s power state within a single insert. When dis-
abled, the plug-in no longer uses UAD DSP resources.
Click the POWER modifier switch to latch the option, then toggle any plug-in’s power
state by clicking its modifier, or swipe across multiple modifiers.
Note: This option performs the same function as the Plug-In Power switch in the
header within the plug-in editor window.
When POWER is latched, disabled plug-ins are indicated by a gray modifier icon, and ac-
tive plug-ins have a green modifier icon.
The POWER modifier when latched. Plug-ins are shown powered (left) and disabled (right).
Because this function unloads and loads the plug-in from the DSP, audio artifacts can
occur if the power state is changed while audio is being processed by the plug-in.
Tip: To disable individual plug-in processing without audio artifacts, use the power
control within the plug-in interface instead, which keeps the plug-in loaded on the
DSP.
View
Options
Sends View
Options
(Apollo rack
models)
Sends View
Options
(Apollo Twin)
Overview, Inputs, & Inserts
View modifier switches