Technical information

Apollo Software Manual Chapter 4: Console Reference 56

Show All Sends Option

All sends can be viewed simultaneously by holding the Option key (on computer key-

board) while clicking any SHOW switch in Sends View.

All sends are visible when a SHOW switch is option-clicked

Sends COPY TO Modiﬁer

This switch instantly copies the current monitor mix to the send mix

that is currently selected with the Available Sends switches.

Tip: The COPY TO function is typically used when a cue mix that

is similar to the monitor mix is needed, but with minor adjust-

ments (e.g., creating a “more me” cue mix).

The text label within the COPY TO switch changes to the send mix

that is currently selected with the Available Sends switches, indicating the destination of

the pasted monitor mix.

Caution: Use the COPY TO function carefully. Depending on the states of the mon-

itor mix and the destination send mix, cue output routings, and the volume setting

of monitoring systems (e.g., headphones) attached the cue outputs, this function

could cause an extreme increase in volume at the destination outputs.

COPY TO Menu

Right-clicking (or control-clicking) the main (silver) monitor faders

presents the COPY TO menu. Selecting a destination performs the

same function as the COPY TO modiﬁer described above.

COPY TO modiﬁer

COPY TO menu