Technical information

Apollo Software Manual Chapter 4: Console Reference 66
Sends Popover
Note: See “Sends Overview” beginning on page 35 for related information.
The Sends popover window is where all available sends for an individual channel can be
adjusted. To access the Sends window, click the Sends display when Overview is active.
The Sends popover
Sends Popover Window Descriptions
Input Name – The name of the Apollo input is displayed as the window’s title. If the in-
put name is customized in Console, the customer name is displayed here.
Previous/Next Channel – These buttons switch the window to display the sends of adja-
cent channels. The “Command+Left/Right Arrow” keyboard shortcut can also be used to
navigate channels.
Tip: To prevent the window from moving when these buttons are used, drag the
Sends window to any location other than its default position.
Bus Name & Color – The bus name and its color are displayed above each send.
Send Pan – Adjusts the input’s position in the stereo field of the send bus. The pan
knobs are not displayed when the input is in stereo linked mode, which forces the stereo
channels to automatically pan hard left/right.
Send Mute – The Mute button can be used to disable/re-enable the bus send. When the
send is active, the button is lit.
Send Level – This fader adjusts the input channel’s signal level sent to the bus.
Send Meter – The post-fader signal level of the Send is displayed here.
Previous/Next Channel
Bus Name & Color
Send Pan
Send Level & Meter
Close Window
Send Mute
Console Default Input Name