Technical information

Apollo Software Manual Chapter 4: Console Reference 79
Global Insert Effects
These buttons globally switch all Console’s inserts to either pass all UAD insert effect
processing to the DAW (print wet) or not (monitor wet but print dry).
Insert Effects can also be individually switched on a per-channel basis (see Channel In-
sert Effects). The Global Insert Effects switches override all the individual Channel Insert
Effects settings. See Insert Effects Overview additional details.
Important: UAD plug-in processing in Console’s Unison and auxiliary inserts is
always routed to the DAW (when recording the AUX channels), regardless of the
current Insert Effects setting (Unison & aux insert processing is always recorded).
UAD REC (print all wet)
When this switch is lit RED and the UAD MON switch is off, all insert ef-
fects on all channels are routed to the DAW.
UAD MON (print all dry)
When this switch is lit BLUE and the UAD REC switch is off, no insert ef-
fects on any input channels are routed to the DAW (except Unison and aux
processing, which is always recorded).
Both UAD REC and UAD MON (print wet and dry)
When both switches are lit YELLOW, some individual channels are recorded
with insert processing and some are recorded dry, as determined by the
Channel Insert Effects switches. Clicking one of the global insert effects
switches will override the individual channel insert effects settings.
Show Strips
These switches show and hide the visibility of the auxiliary return strips and/or the con-
trol room options strip. By default, these strips are not visible. The strips are visible when
its SHOW switch is engaged (lit).
The SHOW buttons disengaged (left) and engaged (right)