Owner manual

Realtime Rack Manual Chapter 6: Using UAD Powered Plug-Ins 141

Modes with Tempo Sync

The UAD DM-1 and UAD DM-1L plug-ins (and DM-1 within CS-1) have a Mode menu

that switches the plug-in operation between delay, chorus, and ﬂanger mode. In these

plug-ins, when the Mode is set to DualDelay and PingPong, the delay Time and modula-

tion Rate parameters are simultaneously available for Tempo Sync.

However, when the plug-in is set to a Chorus or Flanger mode, only the Rate is available

for Tempo Sync. This enables the more typical and musical chorus/ﬂange effect by only

syncing the modulation Rate to the tempo while the delay time remains constant.

Roland RE-201 Sync

When the RE-201is in Tempo Sync mode, note values

can be imprecise due to the ﬁxed tape head rela-

tionships. Values that are imprecise approximations

(but are within the available delay time range) are

displayed with a “+” or “-” symbol. The leading head in the current mode is accurately

synced; the other values are based on the ﬁxed tape head relationship. Note that when

a parameter note value is out of range of the current tempo note value, the note value

ﬂashes (instead of in parentheses on a red background).