Owner's manual

UAD Powered Plug-Ins Manual - 161 - Chapter 14: Fairchild Tube Limiter Collection
Fairchild 670 Modes
2 Compressors,
4 Modes
There are two independent compressors within the Fairchild 670. Depending
on the state of the AGC Switch and the Sidechain Link switch, four operating
modes are possible. The modes are detailed in this section.
Modes Table The switch positions required for each operating mode is shown in Table 14
below. See “Lateral/Vertical” on page 160 for an overview of these terms.
Dual Mono In dual mono mode, the Fairchild 670 operates as two separate monophonic
compressors with independent control of the left and right channel signals.
There is no interaction between the two compressors.
Dual Lat/V
ert In dual lateral/vertical mode the Fairchild 670 operates as two monophonic
compressors with independent control of the middle and side components of
the two input signals. The input signals are processed by the sum/difference
(mid/side) matrix before and after the compressors, but there is no interaction
between the two compressors.
Stereo
Left/Right
In this mode, the Fairchild 670 operates as a typical stereo dynamics proces-
sor. The left input is fed to the one compressor, and the right input is fed to the
other. The dynamics control signal sidechain of the two compressors are
linked so that they both compress the same amount at any instant, preventing
transients which appear on only one channel from shifting the stereo imaging
of the output.
Any transient above the threshold (on either channel) will cause both channels
to compress, and the amount of compression will be similar to the amount of
compression for a transient which appears on both channels at the same time.
Additionally, the attack and release times for the two compressors will be the
same, and attack and release behavior will be the average of the settings for
the two channels. Mono transients will have an effective attack time of about
one half the attack time for transients on only one of the two channels.
Table 14. Fairchild Operating Modes
AGC Switch Setting Sidechain Link Setting Operating Mode
Left Right Unlinked Dual Mono
Lat Vert Unlinked Dual Lateral/Vertical
Left Right Linked Stereo Left/Right
Lat Vert Linked
Stereo Lateral/Vertical