Owner's manual

UAD Powered Plug-Ins Manual - 324 - Chapter 30: Precision Buss Compressor
Gain Reduction
Meter
The Gain Reduction meter dis-
plays the amount of gain re-
duction occurring within the
compressor.
More blue bars moving to the left indicate more gain reduction is occurring.
The meter range is from –16 dB to 0 dB. Signal peaks are held for 3 seconds
before resetting.
Power The Power switch determines whether the plug-in is active.
Click the toggle button or the UA logo to change the state.
When the Power switch is in the Off position, plug-in process-
ing is disabled and UAD DSP usage is reduced (unless UAD-
2 DSP LoadLock is enabled). When the plug-in is bypassed with this switch
(but not by the host bypass), the I/O meters and the Input Level knob remain
active.