Owner's manual

UAD Powered Plug-Ins Manual - 491 - Chapter 50: UA 1176 Classic Limiter Collection
In All Button mode the ratio goes to somewhere between 12:1 and 20:1, and
the bias points change all over the circuit, thus changing the attack and re-
lease times as well. The unique and constantly shifting compression curve that
results yields a trademark overdriven tone that can only be found in this family
of limiter/compressors.
All Button mode is available in all 1176 models.
Multi Button
Modes
The UA 1176 Limiter Collection includes the ability to select a variety of “Multi
Button” combinations, offering various interpretations of the “All Button” idio-
syncrasies. Various button combinations will yield audibly different compres-
sion characteristics.
Selecting
All/Multi Button
Ratio Modes
In UA 1176 Limiter Collection
To select the various combinations of multiple buttons, shift+click the Ratio
buttons.
Combinations are limited to the modes that actually affect the sound in the
hardware. See Figure 158 below for the available combinations.
For the combinations with three or more buttons, the shift-clicking the outer
buttons will automatically engage the inner buttons (the inner buttons cannot
be disengaged; such combinations don’
t affect the sound in the hardware).
• These models can be used as “tone boxes” without compression/limiting by
disengaging the Ratio control altogether (all Ratio buttons “up”). This is ac-
complished by clicking any Ratio button so only one button is engaged,
then shift-clicking the engaged button so none are engaged.
In UA 1176LN/SE Legacy
To select All Button mode on the UA 1176LN/SE Legacy, shift+click any Ra-
tio button.
Available Multi
Button Modes
Figure 158. The Multi-Button modes available in the UA 1176 Limiter Collection. All-Button mode (far
right) is available in 1176LN and 1176SE.