Manual

UAD Powered Plug-Ins Manual - 304 - Chapter 29: Ocean Way Studios
Ocean Way Studios Controls
Mode Ocean Way Studios offers two modes of operation: Re-Mic and Reverb. Click
a mode control to activate the mode. The button of the current mode is illumi-
nated.
For details about the differences between these two modes, see “Modes Over-
view” on page 292.
Re-Mic
In Re-Mic mode, the dry signal path is eliminated and the audio is processed
as if it was recorded inside Ocean Way Recording.
Important: For the intended design results and to minimize phasing when
Ocean Way Studios is in Re-Mic mode, exercise caution to ensure the origi-
nal dry signal is not mixed with Ocean Way Studio’s processed output.
Reverb
In Reverb mode, the plug-in behaves like most reverb plug-ins; the modeled di-
rect signal component is not included. Due to inherent nature of the Ocean
Way Studios design, changes to the microphone Distance and Gain settings
are less audible in Reverb mode than Re-Mic mode.
Studio Ocean Way Studios contains meticulous models of rooms A and B at Ocean
Way Recording. Each room (Figure 90 below) has unique sonic characteris-
tics.
Figure 96. Interior photos of Room A (left) and Room B (right) at Ocean Way Recording