Manual

UAD Powered Plug-Ins Manual - 378 - Chapter 38: Precision Multiband
Adjusting Gain The gain of a band can be adjusted by click-drag-
ging the top of its colored line. In this case the cursor
changes to an up/down arrow when hovered over
the hot spot to indicate the direction available for
dragging.
Adjusting Gain
and cF
If the cursor is moved slightly lower than the above ex-
ample, the gain and center frequency can be ad-
justed simultaneously, without adjusting the band-
width. In this case the cursor changes to an
up/down/left/right arrow when hovered over the hot
spot to indicate the direction available for dragging.
Adjusting Gain
and Bandwidth
If the cursor is moved to the upper-left region of the
three center bands (LMF, MF, HMF), the gain and
bandwidth can be adjusted simultaneously, without
changing the center frequency. In this case the cursor
changes to a diagonal arrow when hovered over the
hot spot to indicate the direction available for drag-
ging.
Adjusting xF If the cursor is moved to where two bands crossover,
the crossover frequencies can be adjusted, without
changing the gain or center frequency. In this case
the cursor changes to a left/right arrow when hov-
ered over the hot spot to indicate the direction avail-
able for dragging.
Note: Frequencies can also be adjusted by using the Frequency Value param-
eters (see“Frequency Values” on page 379).