Instruction Manual

UAD System Manual - 55 - Chapter 6: UAD Meter & Control Panel
Save Detailed
System Profile
Clicking this button will generate a detailed system profile and prompt you for
a location to save the text file to disk. This file contains an even greater level
of detail than the System Information panel, which can be useful for trouble-
shooting or if UA Customer Support requests this document when providing
assistance.
The profile lists the version strings of the individual UAD software compo-
nents, installed device type(s) with serial and hardware ID numbers, host com-
puter information, and detailed authorization status for all UAD plug-ins.
Plug-Ins Panel
The Plug-Ins panel (Figure 11 on page 57) displays the current authorization
status of all UAD plug-ins. This is also where you can activate plug-in Demo
Mode (“UA Online Store” on page 41) and configure UAD plug-ins to run on
a specific device. Use the scrollbar to view plug-ins that are not visible in the
list.
Authorize
Plug-ins button
This important button links directly to your ac-
count at the UA online store to automatically gen-
erate and download an authorization file for
your UAD plug-ins. If you do not already have an account, you are redirected
to the registration page to create one.
Important: UAD plug-ins require authorization before they can be used. For
detailed information, see “Authorization Overview” on page 37. Without au-
thorization, UAD plug-ins can be enabled to run for 14 days without func-
tional limitations in a timed demo mode (see “Demo Mode” on page 40).
The complete procedure for UAD device authorization is detailed in
Chapter 2, “UAD Installation.” See “Authorize Plug-Ins Procedure” on
page 23 for complete step-by-step instructions. If the UAD computer is not
connected to the internet, see “” on page 24.
Plug-In Column All currently installed UAD Powered Plug-Ins are displayed in the Plug-In col-
umn. Use the scrollbar to view the entire list if necessary.
Status Column The Status column reflects the current state of each UAD plug-in. After the au-
thorization file is loaded (“Authorization Overview” on page 37), the status
will show one of the following: