User manual

UAD Powered Plug-Ins Manual - 103 - DreamVerb

Bypass The early reflections can be disabled with this switch. When the switch is off

(black instead of grey), the other Reflections controls have no effect. This

switch has no effect on the direct signal path.

Reﬂections Start This bat controls two early reflections start parameters. Dragging the bat hor-

izontally controls the ER predelay (the delay between the dry signal and the

onset of the ER). Dragging it vertically controls the amplitude of the reflections

energy at the ER start time.

Reﬂections End This bat controls two ER end point parameters. Dragging the bat horizontally

controls the ER end time (the time at which the ER is no longer heard). Drag-

ging it vertically controls the amplitude of the reflections energy at the end

point.

Filtering This parameter determines the amount of filtering from the Materials panel to

be applied to the early reflections. The Materials effect upon the ER is most

pronounced when Filtering is set 100%.

Note: The parameters in the Materials panel have no effect on the early re-

flections unless this parameter value is above 0%.

Figure 35. DreamVerb Reflections panel

ER Start control

bat (predelay &

amplitude)

Materials

Filtering

control bat

ER End control

bat (time &

amplitude)

Late-field

relative timing

display

Bypass

switch