User's Manual

UniLink UL-800/801 FANS
SCN 30.X
Operator’s Manual
90 23-20-06.02
December 2011
Printer Test
Menu Navigation: UNILINK MENU > MAINTENANCE > TESTS > PRINTER
If a printer is connected and configured, selection of PRINTER, LSK
[1L] will send test message text to the printer. If there is no printer
configured, the PRINTER option will not be displayed.
When PRINTER is selected, a pop-up window PRINTER TEST IN
PROGRESS is displayed. When complete, the pop-up window will no
longer display.
The following will be printed:
THIS IS NOT AN UPLINK. THIS IS AN INTERNALLY
GENERATED PRINTER TEST MESSAGE. !"#$%&'()*+,-
./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`
{|}~;
Image Test
Menu Navigation: UNILINK MENU > MAINTENANCE > TESTS > IMAGE
Selection of IMAGE, LSK [2L] is used to display a test image. While
the test image is being displayed, any key push will cause the display
to return to the MAINTENANCE page. Image Test is not available
when the aircraft is in the air.
When IMAGE is selected, a pop-up window IMAGE TEST IN
PROGRESS will display. Upon test completion, an ADVISORY will
display on the CDU and NEW WX MAP is displayed adjacent LSK
[5L] (LSK for MCDU may be different).