User's Manual

UniLink UL-800/801 FANS
SCN 30.X
Operator’s Manual
128 23-20-06.02
December 2011
2. With TO WPT active, enter a waypoint name. Press [ENTER].
3. The TO WPT ETA information is supplied by the FMS. To
change, if not active, press LSK [2L] and enter up to four digits
(Time is UTC time), then press [ENTER].
4. If not active, press GROUNDSPEED, LSK [3L] and enter up to
three digits. Press [ENTER].
5. If not active, press WINDS, LSK [4L] and enter three digits for
wind direction. Press [ENTER] to advance the cursor to the
velocity field and enter up to three digits. Press [ENTER].
6. If not active, press ALTITUDE, LSK [3R] and enter the current
altitude if no ADC altitude is available. Press [ENTER].
7. Press the SEND LSK to place the report in queue for
transmission.
Automatic Position Reporting
1. Press AUTO, LSK [1R] to toggle the Automatic Report function to
ENABLED or DISABLED (default is based on configuration
setting). The current status is displayed to the left of AUTO.
2. If AUTO is set to ENABLED, press IN AIR INTV, LSK [2R] to set
the report interval time (default is based on configuration setting).
Press [ENTER].
NOTE: The IN AIR INTV option is not present if AUTO is set to
DISABLED.